Det-tronics S3 Graphics Manual de usuario descargar pdf (Pagina 13)

1-4

INSTALLATION

Version 6.0

Requirements

The minimum S

workstation hardware requirements are:

Computer. The S

software suite is designed to run on an Intel

based computer with at least a 800 MHz

Pentium III processor, running Windows Vista/XP Professional. Computers operating on a 64 bit platform are fully

supported; as with many modern programs, the faster the machine, the better the performance.

A hard drive with at least 50 MB of available space and a CD-ROM drive is also required for installation.

Memory. S

Safety System Software is a high performance Operator Interface System (OIS) environment and

requires a minimum of 256 MB of physical memory. When custom graphics are included in a project the memory

footprint grows by 1MB per screen, based on XGA screen resolution, higher resolutions require more memory.

Det-Tronics typically provides a minimum of 512MB of physical RAM in its OIS installations.

Display. S

requires thousands of colors (16 bit) and a minimum display resolution of 1024 pixels wide by 768

pixels high (XGA). Software support for touchscreens is included.

Serial Ports. S

is designed to utilize up to ten high speed serial ports, all running at up to 115.2 kbps

simultaneously — typically this includes the two serial ports available on the motherboard of the computer,

plus up to eight additional ports on an expansion card with a serial coprocessor. USB to serial converters are

supported.

Ethernet. S

can communicate with some systems via a single or redundant Ethernet connection. Each network

card must have a separate, ﬁxed, TCP/IP address.

Printers. The system can utilize any properly installed printer for documentation purposes. For on-line alarm

monitoring a serial printer port must be conﬁgured through the “Ports” screen, and the appropriate printer

attached. S

is designed to work with a serial version of the Okidata ML490 four color, tractor feed, dot matrix

printer.

SOFTWARE REQUIREMENTS

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 326 327

Det-tronics S3 Graphics Manual de usuario Pagina 13